TUTTO ASIA PACIFIC PTE LTD
LATEX SETTING BED MORTAR ADDITIVE
Specially formulated to be mixed with protland cement
and clean dry silica sand / dry set mortars which is used as a setting bed
for tiles or natural stone.
LATEX TILE GROUT & MORTAR ADDITIVE
Latex emulsion used in place of water as an additive
for tile grouts and mortars to increase bond strength and reduce shrinkage
MULTI-PURPOSE ACRYLIC LATEX
Latex emulsion used as a setting bed mortar additive,
mortar additive or bonding agent. For more critical applications needing
improved flexural & strength.
DRY-SET TILE ADHESIVE
A pre-weighed, pre-packed dry-set adhesive for installation
of tiles and natural stone in interior or exterior application
POLYMER MODIFIED COLOUR GROUTS
Tile gout containing polymer additives for improved
strength. Addition of water only. Available in sanded (for 3-12mm joints)
and unsanded (for 0-3mm joints)
EPOXY TILE GROUT AND ADHESIVES
3 part epoxy mortar and grout system for chemical
resistant floor and wall tile installation. High bond strength designed
for a variety of tiles.
A ready for use ceramic tile adhesive for partition
wall, particle board and areas where flexibility is required.
CEMENTITIOUS WATER-PROOFING SYSTEM
A flexible water proofing slurry / mortar consisting
of part A (liquid) and part B (power). Applied by brush or trowel to required
A waterproof additive to normal cement, sand mortar
or concrete which initiates crystallization's of pores thereby sealing
mortar / concrete from water penetration.
ACRYLIC SEALER AND WATER REPELLANT
A acrylic solvent sealer specially for back of marble
or granite. Used a dust sealer & water repellant for concrete or brick
wall gable end.
A solvent, low viscosity epoxy primer for bonding
new epoxy mortar, concrete, mortar to a wide variety of new & old, vertical
& horizontal substrates.
A 3-part chemical & acid resistant epoxy mortar
which exhibits high bond & compressive strength. Easily applied by
A water dilatable epoxy coating producing a tough,
hard wearing and chemical resistance surface with good adhesion to damp & dry substrates.
EPOXY RESIN FOR CRACK INJECTION
A 2-part, low viscosity, injectable epoxy resin
for crack repairs and others and other structural works. High bond tensile
REINFORCEMENT POLYMER PRIMER
A polymer latex formulated as a primer for steel reinforcement
to prevent carbonation attack or corrosion from impurities.
A high strength polymer bonding agent used for bonding
new / concrete mortar to old or new concrete / cement mortars.
POLYMER MODIFIED REPAIR MORTAR
A one-part cementitious repair mortar blended with
polymer additives. Mix with water only. Suitable for over-head, vertical
or horizontal repairs.
2-PART POLYMER MODIFIED REPAIR MORTAR
A 2-part cementitious repair mortar consisting of
part A (liquid) and part B (powder). Designed for more critical repairs.
A pre-mixed, non-metalic, shrinkage compensating
pumpable grout. Designed for installation of anchor bolts and setting
CONCENTRATED MULTI-PURPOSE POLYMER ADDITIVE
Used for adding into Portland cement mortars or
concrete in various concentrations to increased durability and strength.
Ideal for polymer concrete and feather edging repair for industrial areas.
and chemical resistance color quartz available in any color and any size.
Granules are ceramically coated for fade resistance and longer lasting life,
it can be in cultured marble, granite coatings or epoxy screed.
GRANITE & MARBLE GLUE
quick setting and rapid strength hardening resin which can be used to
patch up marble and granite holes / cracks and bond complex shapes before
polishing. It can be used also for temporary anchoring.
Available in transparent solid or colored.
textured coatings to simulate granite or other natural stones. Color quartz
are fade resistance and will not change when subject to U.V.
38 CEMENTITIOUS SELF-LEVELLING SCREED
based, polymer modified, self-levelling, floor compounds pre-bagged &
pre-weighed. Extremely durable & fast setting, pedestrian & light
goods trafficable in 1 hr (overnight for lorry).
NON-METALLIC FLOOR HARDENER
A factory blended, ready to use mineral aggregate
floor hardener designed for aggressive & heavy abrasive traffic, available
in metallic, ferrous or non-ferrous.
A water base silicate compound, designed for control
of moisture in concrete for proper hydration. Does not affect adhesion.
TILE AND NATURAL STONE STAIN REMOVER
A muratic tile cleaner which does not give off unpleasant
odour and is effective and convenient to use. Does not attack glaze or
more information contact us
Asia Pacific Pte Ltd
120, Woodlands Industrial Park E
Tel : 65-63671878
Fax : 65-63661252